大阳城集团2138cc

CNWelcome to the National Passenger Car Quality Supervision and Inspection Center Website
Current Position:Home - Testing Capability - Simulation Impact Laboratory
Simulation Impact Laboratory

This laboratory was established in June, 2008, undertaking regulation compulsory test, export certification, children’s seat assessment, C-NCAP whiplashing test and so on. On January, 2013,new simulation impact laboratory was officially put into use. It occupies over 3200m2? with total length 135m and width 24m. Two sets of Mitsubishi hydraulic servo acceleration crash simulator are equipped in this laboratory. Until the end of 2015, simulation impact laboratory has completed more than 10000 times impact tests.

Testing Equipment

Hydraulic servo acceleration crash simulator (two sets)

It can simulate auto forward impact, post impact, destructive and non-destructive side impact basing on actual vehicle waveform.

Main technical parameter

  • Maximum Load Mass:2000kg
  • Simulated acceleration:0-80g/-7-73g(Negative G)
  • Simulated maximum speed:90km/h
  • Acceleration rise rate:15g/ms
  • Acceleration precision:≤±9%
  • Speed precision:±1.5km/h
  • Waveform repeatability:±1%

Dummy

This laboratory is equipped with complete dummy family and strict dummy calibration system, covering Hybrid-Ⅲ, Bio RID-Ⅱ, Child P, Q system, TNO 10 system and so on which have superior precision and repeatability.

Testing Capability

Regulation tests

cover all relevant projects that need dynamic assessment from China, US, Europe, Japan, South Africa, Gulf, Australia and so on. Export certification and supervision and inspection tests can also be conducted in this laboratory.

Dynamic tests of door lock and hinge
Meet relevant requirements of GB15086、ECE R11、FMVSS206、ADR2.


Trunk impact test
Meet relevant requirements of GB15083、ECE R17、ADR3.


Interior protrusion passenger protection performance dynamic tests
Meet relevant requirements of GB11552、ECE R21.


Dynamic tests for children seat
Meet relevant requirements of GB27887、FMVSS213、ECE R44.


Passenger protection in auto frontal impact test
Meet relevant requirements of GB 11551.


Dynamic test for passenger vehicle and fastener intensity
Meet relevant requirements of GB13057、ADR68/00、ECE R80.


Dynamic test for auto seats intensity
Meet relevant requirements of GB 15083、ECE R17、ADR3.


Dynamic tests for battery pack
Meet relevant requirements of GB/T-31467.


Dynamic tests for special-purpose school bus seat and fastener intensity
Meet relevant requirements of GB24406.

NCAP test

This is the only official laboratory that can do C-NCAP whiplashing test and child restraint system assessment. Whiplashing tests also cover Euro-NCAP, J-NCAP, IIHS and other regulation.

Whiplashing test (C-NCAP only official laboratory)
Meet relevant requirements of C-NCAP、E-NCAP、IIHS and so on.


Child restraint system assessmentC-NCAP only official laboratory
Through fair, open and impartial assessment for child seat, the product quality can be promoted.


Product development and verification test

Restraint system matching test


Development & Verification test for auto components
Dynamic performance assessment for seat, ECU, dash board, luggage rack and fuel tank


Development & Verification test for other carriers and products
Meet dynamic assessment requirements of airplane, ship, train and other products’ components.

Site map | Contact Us
Copyright 2015 National Passenger Car Quality Supervision and Inspection Center

  • 022-84779666

  • Address:68,East Xianfeng Road,Dongli District,Tianjin,China

  • tatc@catarc.ac.cn
XML 地图 | Sitemap 地图